Felled Tree Strikes Crew Cab Truck
BACKGROUND: On a summer morning in the Southeastern U.S., a crew cab truck transporting three logging company employees was traveling to the deck to begin their shift. Conditions were clear that day and weather was not a contributing factor.
UNSAFE ACTS AND CONDITIONS: The tracked feller buncher operator was cutting alongside the haul road fully aware that additional crew members would be arriving soon to start their workday.
ACCIDENT: The employees in the company crew cab had traveled approximately four miles through the woods on the haul road en route to the deck. The crew cab stopped along the haul road before arriving at the deck to drop off the skidder driver close to his machine. The truck continued traveling to the deck where the loader and second skidder were located. Other crew members had arrived onsite approximately 45 minutes earlier and had already started their workday. The tracked feller buncher operator began cutting along the side of the haul road near the deck. The feller-buncher began cutting a 20-in. (DBH) gum tree measuring approximately 80 ft. in height. As the tree was being severed from the stump, the operator lost control of the tree and it started to fall back toward the machine. Instinctively, the operator used the cutter arm to push the tree away from the cab and toward the haul road. At the exact moment the operator was pushing the tree away from the feller-buncher, the crew cab truck was arriving at the deck. The felled tree struck the crew cab and came to rest on top of the truck. The feller-buncher operator alerted the other crew members and they assisted with removing the top of the tree from the cab.
INJURY: The crew extracted both employees from the crew cab truck and transported them to the intersection of the haul road and state highway to meet EMS personnel. The injured workers were transported to the local hospital where both were treated and released later in the day. One was diagnosed with a cervical fracture and referred to a neurosurgeon for further evaluation.
RECOMMENDATIONS:
- Always be aware of other crew members’ location, especially while conducting felling operations
- Properly assess the weight and balance of trees prior to felling to minimize accident risk
Supplied by Forest Resources Association
Latest News
FAILURE TO LOCKOUT COSTS EMPLOYEE HIS HAND AND FOOT
BACKGROUND: A logging crew in the Southeast was clearcutting a tract and using a whole-tree chipper to process treelength pulpwood. After the crew had operated the machine for two weeks, the flail chains needed to…
FELLER-BUNCHER ROLLOVER INJURES OPERATOR
BACKGROUND: A logging crew was clearcutting a steep tract in the Appalachians. The feller-buncher, facing straight downhill, would cut trees on the way down a very steep slope and then would back up the hill…
OBSERVERS OF FELLING OPERATION HAVE CLOSE CALL
BACKGROUND: Two foresters were observing a timber cutter felling a large, difficult tree on an Appalachian-region broken mine spoil site in the spring. PERSONAL CHARACTERISTICS: The foresters had over 65 years of combined work experience.…
SAW CHAPS SAVE FORESTER FROM SERIOUS INJURY
BACKGROUND: A forester was using a chain saw to perform timber stand improvement work on his own property on a clear, sunny, extremely cold winter day in the Appalachians. PERSONAL CHARACTERISTICS: The 34-year-old forester had…
Have A Question?
Send Us A Message