It’s Time To Winterize




Southern loggers and their equipment may not have to cope with the brutally harsh winter conditions faced by their Northern counterparts, but that doesn’t mean they can ignore colder weather challenges. Here are a few simple steps every logger can take to help ensure uninterrupted productivity as the temperature drops.

Change to a lighter-weight engine oil. Most forestry equipment manufacturers recommend switching from heavier 15w40 to lighter 10w30 for winter operation. The lighter oil makes morning starts easier, reducing the load on batteries. It also flows more quickly and smoothly through cold engines to better accomplish its engine-protecting mission.

Check engine coolants. For winter conditions in most of the region’s forests, a glycol concentration of 50% is more than sufficient, protecting against coolant freezing down to -30ºF. Test-strip kits make this check easy, even in the field. If the glycol concentration is low, add glycol to your cooling system until the concentration reaches the desired level. If the cooling system is full, you will need to drain some coolant before adding glycol.

Also test for the proper level of coolant additives, which protect the cooling system against corrosion and cavitation. Separate test strips are available for additive testing. If the additive concentration is low, add the concentrated coolant additive specified in your owner’s manual.

Be sure to always use the proper manufacturer-specified coolant or additive concentrate for each piece of equipment. Newer engines use coolants based on nitrate-free organic acids rather than the nitrate-based coolants specified for older models. Using the wrong coolant, or mixing coolants, can damage an engine if the additive concentrations fall below manufacturer-specified levels.

Winterize fuel, too. Moisture in fuel can condense and freeze in fuel lines, in equipment fuel tanks and in external fuel storage tanks. Adding a manufacturer-specified winter fuel additive once weekly or bi-weekly can help prevent freezing even in the coldest conditions. If you use biodiesel in your equipment, add a manufacturer-specified winter fuel additive with every fill-up.

Check batteries. Batteries suffer the most wear in hot weather, but the results of that wear tend to show up in the winter, when cold-morning cranking puts the heaviest loads on them. Protect your equipment by checking at the beginning of winter to be sure each battery is fully charged and that it is delivering the specified amperage.

Monitor tire inflation. Cold weather can reduce tire pressure by as much as 10%, so be especially vigilant as the temperature drops. Regardless of temperature, tire pressure should be checked weekly on all machines.

Article by Diego Navarro, Aftermarket Sales Manager, Americas, John Deere

Latest News

Sponsored Content Provided By BARKO

Sponsored Content Provided By BARKO

When the initial Pick your Promo promotion was launched earlier this summer, the folks at BARKO—from sales and marketing, to operations and finance—braced themselves for a dramatic increase in retail activity. By the time the initial promotion timeline had elapsed on July 31, the BARKO team was all-but hyperventilating. The response to the promotion was even more enthusiastic than the team had originally anticipated…

Louisiana Grapples With Largest Ever Wildfire

Louisiana Grapples With Largest Ever Wildfire

The arson-caused Tiger Island Fire in Louisiana is the state’s largest on record at 31,000 acres and was 50% contained in early September, according to news reports. The wildfire is one of almost 600 wildland fires that have burned in the state in…

Have A Question?

Send Us A Message